Disassemble the 3×3 Moyu Weilong GTS V2: A Complete Guide
The Moyu Weilong GTS V2 is a highly regarded 3×3 speedcube, offering excellent performance and smooth turning. Over time, as with any puzzle, it may require disassembly for cleaning, lubrication, or adjustment. Disassembling the Moyu Weilong GTS V2 may seem daunting at first, but with the right steps and tools, it becomes a straightforward process. In this guide, we will walk you through the disassembly process, provide troubleshooting tips, and help you maintain your cube for optimal performance. Whether you’re a beginner or an experienced cuber, this article will give you the knowledge you need to take apart and reassemble your 3×3 Moyu Weilong GTS V2 safely and effectively.
Why Disassemble Your 3×3 Moyu Weilong GTS V2?
Before we dive into the step-by-step process, let’s briefly discuss why you might want to disassemble your 3×3 Moyu Weilong GTS V2 cube:
- Cleaning: Over time, dust, dirt, and lubricant buildup can slow down the cube’s performance. Disassembling the cube allows you to clean each part thoroughly.
- Lubrication: Regular lubrication ensures smooth turning. When you disassemble the cube, you can reapply lubricant to the internal pieces to keep it operating at peak performance.
- Adjustment: If the cube feels too tight or too loose, disassembling it allows you to adjust the tension of the springs or re-align the pieces.
How to Disassemble the 3×3 Moyu Weilong GTS V2
Now that you understand why disassembling your cube is important, let’s move on to the disassembly process. Follow these steps carefully to take apart your 3×3 Moyu Weilong GTS V2 safely.
Step 1: Prepare Your Workspace
Before you start, make sure you have a clean, flat surface to work on. This will prevent any parts from rolling away or getting lost. Additionally, gather the following tools:
- A small screwdriver (for adjusting tension or loosening screws)
- Lubricant (for re-lubing the cube after cleaning)
- A soft cloth or tissue (to clean the pieces)
Having these tools on hand will make the process easier and more efficient.
Step 2: Remove the Center Pieces
To begin disassembling your 3×3 Moyu Weilong GTS V2, you’ll need to remove the center pieces. These pieces are located in the middle of each face of the cube. Start by carefully popping one of the center pieces out with your fingers. You can use a plastic pry tool or a small flathead screwdriver if you need assistance. It may take a bit of force, but the center pieces are designed to come out without damaging the cube.
Once you have removed the first center piece, you can proceed to the other faces. Be gentle and work slowly to avoid breaking any of the parts.
Step 3: Remove the Edge and Corner Pieces
After you’ve removed the center pieces, you’ll be able to access the edge and corner pieces. Start by gently pulling the edge pieces away from their respective slots. Once the edges are removed, you can begin removing the corner pieces as well. These pieces are typically easier to remove compared to the edge pieces.
As you remove each piece, keep them organized so you can easily reassemble the cube later.
Step 4: Remove the Core and Springs
With the outer pieces removed, you’ll now have access to the internal core and springs. Use your screwdriver to carefully unscrew the screws holding the core together. Be cautious when doing this, as the springs can sometimes pop out if you’re not careful.
Once the screws are removed, the core can be taken out. It’s a good idea to place the screws and springs in a small container or a zip-lock bag to avoid losing them.
Step 5: Clean the Pieces
Now that the cube is fully disassembled, it’s time to clean the individual parts. Use a soft cloth or tissue to wipe down each piece of the cube, including the core and springs. If there’s dirt or grime built up in the pieces, you can use a mild soap solution and water to clean them. Make sure to dry each piece thoroughly before reassembly to avoid any moisture affecting the cube’s performance.
Step 6: Lubricate the Cube
After cleaning, it’s time to lubricate the parts. Lubing your cube helps it move smoothly and reduces friction. Apply a small amount of lubricant to the core, the edge pieces, and the center pieces. You can use a lubricant designed specifically for speedcubes or a silicone-based lubricant. Be sure to spread the lubricant evenly and avoid over-applying it, as excess lubricant can attract dirt.
Step 7: Reassemble the Cube
Reassembling the cube is essentially the reverse of disassembling it. Start by placing the core back in the middle of the cube, ensuring the screws and springs are positioned correctly. Tighten the screws to your preferred tension, but don’t overtighten them as it can affect the cube’s performance.
Next, insert the edge and corner pieces back into their slots, ensuring each piece clicks into place. Once all the pieces are in position, pop the center pieces back onto each face of the cube.
Finally, perform a few turns to make sure the cube moves smoothly. If it feels too tight or too loose, you may need to adjust the tension further until you achieve the desired feel.
Troubleshooting Tips When Disassembling the Moyu Weilong GTS V2
Sometimes, things may not go as planned during the disassembly or reassembly of your 3×3 Moyu Weilong GTS V2. Here are some common issues you might encounter and how to fix them:
- Corners Won’t Fit Properly: If the corner pieces aren’t fitting correctly, it could be due to misalignment of the core or tension issues. Try loosening the screws slightly to allow the pieces to slot in more easily.
- Cube Feels Too Stiff: If the cube feels stiff after reassembly, it may be due to overtightened screws. Loosen the screws slightly to reduce the tension and make the cube more responsive.
- Pieces Pop Out Easily: If pieces keep popping out, the screws may be too loose. Tighten the screws incrementally until the cube holds together well without compromising its turning ability.
- Uneven Lubrication: If you notice some parts of the cube are moving more smoothly than others, it could be due to uneven lubrication. Apply a small amount of lubricant to the affected areas and rub it in evenly.
Regular Maintenance and Care
Maintaining your 3×3 Moyu Weilong GTS V2 in optimal condition is essential for consistent performance. Here are some tips for ongoing care:
- Clean Regularly: Periodically disassemble your cube to clean the pieces and remove any dirt or dust. Regular cleaning ensures smooth operation and prevents buildup.
- Lubricate Periodically: Reapply lubricant every few months to keep the cube turning smoothly. Avoid over-lubricating, as too much lubricant can attract dust and dirt.
- Check Tension: Adjust the tension of your cube regularly to maintain your preferred feel. Tightening or loosening the screws can significantly affect the turning speed and stability of the cube.
Conclusion
Disassembling the 3×3 Moyu Weilong GTS V2 is a simple but essential process for maintaining and enhancing the performance of your cube. By following the step-by-step guide above, you can easily take apart, clean, lubricate, and reassemble your cube to keep it in top condition. Regular maintenance will ensure that your cube performs optimally and lasts for years to come.
Remember, while the disassembly process might seem intimidating at first, with a little patience and care, you’ll soon feel comfortable taking apart and putting back together your Moyu Weilong GTS V2. Happy cubing!
For more tips and guides on cube maintenance, check out our cube maintenance page. For the best selection of lubricants and accessories, visit Speedcube Shop.
This article is in the category Guides & Tutorials and created by TheFixitLab Team