Unveiling the Mystery: Disassembling a Brother MFC-665CW Printer Tray

How to Disassemble a Brother MFC-665CW Printer Tray

The Brother MFC-665CW is a versatile printer, but like all devices, its components may require cleaning or replacement over time. Disassembling the printer tray is a task that might seem daunting, but with the right steps, anyone can manage it. This guide will walk you through the process to disassemble the tray safely and efficiently, ensuring your printer remains in top-notch condition.

Why You Might Need to Disassemble the Printer Tray

The printer tray is a crucial component of your Brother MFC-665CW. Over time, paper jams, dirt buildup, or misalignment can hinder its performance. Disassembly may be required for:

• Clearing persistent paper jams.
• Cleaning out debris or dust.
• Replacing worn-out parts or aligning mechanisms.
• Inspecting for damages that affect paper feeding.

Whatever the reason, handling this task carefully ensures the longevity of your printer and uninterrupted functionality.

Tools You’ll Need

Before diving in, gather these tools to make the process seamless:

• A small Phillips-head screwdriver.
• Needle-nose pliers for delicate parts.
• Soft cloth or compressed air for cleaning.
• Replacement parts (if applicable).

Step-by-Step Guide to Disassemble the Tray

1. Prepare the Printer

Before starting, ensure the printer is unplugged from the power source to prevent electrical hazards. Remove all paper from the tray and place the printer on a stable, flat surface.

2. Remove the Printer Tray

Gently pull out the printer tray as far as it will go. Press the release lever (usually located on the side of the tray) and carefully slide the tray out completely. Set it on a clean surface for inspection.

3. Disassemble Tray Components

To access the internal parts of the tray, follow these steps:

• Use the Phillips-head screwdriver to remove screws securing the top cover of the tray.
• Lift the cover gently, ensuring you don’t damage any clips or latches.
• Inspect the rollers and paper guides. If they appear dirty or misaligned, proceed with cleaning or adjustment.

4. Clean and Inspect

Using the soft cloth or compressed air, remove dust or debris from the tray and its components. Pay close attention to the rollers and corners where dirt tends to accumulate. Replace any worn-out rollers if needed.

5. Reassemble the Tray

Once cleaning and repairs are complete, reverse the disassembly steps:

• Reattach the tray cover and secure it with screws.
• Slide the tray back into the printer until it clicks into place.

6. Test the Printer

Power on the printer and load paper into the tray. Print a test page to confirm everything is functioning correctly.

Troubleshooting Common Issues

If you encounter problems during or after reassembly, here are some tips to help:

• Tray won’t slide back in: Check for any obstructions or misaligned components.
• Printer not recognizing the tray: Ensure the tray is securely locked into place and all sensors are clean.
• Paper feed issues: Inspect the rollers for proper alignment and replace them if necessary.

For more detailed troubleshooting, refer to the official Brother support page for your model.

Tips for Maintenance

To minimize the need for frequent disassembly, follow these maintenance tips:

• Regularly clean the tray and rollers to prevent debris buildup.
• Use high-quality paper to reduce the risk of jams.
• Inspect the tray periodically for signs of wear or misalignment.

Additional Resources

For more tips on maintaining and repairing your Brother printers, check out our comprehensive printer care guide.

Conclusion

Disassembling the Brother MFC-665CW printer tray is a straightforward process when done carefully. Whether you’re tackling a paper jam or performing routine maintenance, the steps outlined here ensure a hassle-free experience. Remember, proper care of your printer can save you time, money, and the frustration of unexpected malfunctions. Take the initiative to keep your device in optimal condition, and you’ll enjoy reliable performance for years to come.

This article is in the category Guides & Tutorials and created by TheFixitLab Team