Unveiling the Secrets of Disassembling an Interion Rolly Chair

How to Disassemble an Interion Rolly Chair: Step-by-Step Guide

When it comes to office furniture, the Interion Rolly Chair is known for its ergonomic design and functionality. Whether you’re looking to move, clean, or replace a part, understanding how to properly disassemble an Interion Rolly Chair is essential. In this guide, we will take you through the process of disassembling your chair in a simple, step-by-step manner. This guide is perfect for those who are new to furniture assembly and disassembly. By the end of this article, you will have the knowledge to tackle this task with ease.

Why You Might Need to Disassemble Your Interion Rolly Chair

There are various reasons you might need to disassemble your Interion Rolly Chair:

• Transportation: If you need to move your chair to a new location, disassembling it can make the process much easier.
• Maintenance: Sometimes chairs need to be cleaned or have parts replaced, and disassembling can give you better access to the components.
• Repairs: If a part is broken or malfunctioning, disassembling the chair allows you to replace it with a new one.

Tools You’ll Need to Disassemble Your Interion Rolly Chair

Before you begin, make sure you have all the necessary tools at hand. The process can be completed with basic tools you likely already own:

• Phillips head screwdriver – for screws that need to be removed.
• Flathead screwdriver – for prying and assistance in removing parts that are tightly fitted.
• Allen wrench – commonly used for chair bolts.
• Rubber mallet – in case any parts need a little extra force to come apart.
• Protective gloves – to avoid injuring yourself with sharp edges or rough surfaces.

Step-by-Step Process to Disassemble Your Interion Rolly Chair

Now that you have the right tools, it’s time to begin. Follow this step-by-step guide to disassemble your Interion Rolly Chair properly:

Step 1: Remove the Seat Cushion

Start by flipping the chair upside down. This will give you access to the seat’s fastening screws. Most Interion Rolly Chairs have a cushion that is either screwed into place or simply clipped on. If it’s screwed, use a Phillips head screwdriver to remove the screws. If it’s clipped, carefully pry it off using a flathead screwdriver.

Step 2: Detach the Armrests

The next step in the disassembly process is to remove the armrests. Use your Allen wrench to loosen and remove the bolts securing the armrests to the chair frame. Make sure to keep track of the bolts, as you’ll need them for reassembly. Some armrests may also be attached with screws, in which case you can use a screwdriver to remove them.

Step 3: Separate the Backrest from the Seat

Now, move on to detaching the backrest. This is usually connected to the seat with screws or bolts. Use your screwdriver or Allen wrench to remove them. Be gentle as you pull the backrest away from the seat, as some models may have additional support brackets that require a little extra effort to detach.

Step 4: Remove the Gas Lift Cylinder

The gas lift cylinder allows the chair to adjust in height, and removing it requires a little more care. To remove it, you will need to detach the base of the chair. Turn the chair upside down once again, and locate the bolts securing the base to the chair. Remove these bolts and carefully pull the base off. You may need a rubber mallet to loosen any tight connections. After the base is removed, you can easily slide out the gas lift cylinder.

Step 5: Take Apart the Chair Base

The chair base is usually made of plastic or metal and has wheels attached to it. To remove the wheels, gently pull them out of their slots. You can use a flathead screwdriver to pry them loose if they are too tight. Once the wheels are off, the base should come apart easily. If you need to replace the wheels, this is a good time to do so.

Troubleshooting Tips During the Disassembly Process

While disassembling your Interion Rolly Chair, you may encounter a few challenges. Here are some troubleshooting tips to help you:

• Screw or bolt won’t come off: If a screw or bolt seems stuck, try applying a little penetrating oil to loosen it. Let it sit for a few minutes, and then try again.
• Parts are tightly fitted: If a part is difficult to separate, use a rubber mallet to gently tap the joint. Be sure to protect the chair’s surface with a cloth to avoid scratches.
• Pieces won’t detach: If the parts aren’t coming apart easily, check to ensure all screws or bolts have been removed. Sometimes a hidden screw might be securing the part in place.

Common Mistakes to Avoid When Disassembling Your Chair

While disassembling, it’s important to avoid certain common mistakes:

• Forgetting to keep track of parts: Make sure to keep all screws, bolts, and other small components in a safe and organized place, such as a small bowl or plastic bag.
• Using the wrong tools: Using incorrect tools can lead to stripped screws or broken parts. Always use the right tool for each task.
• Rushing through the process: Take your time. Rushing can lead to mistakes or damage. If you encounter resistance when disassembling, slow down and reassess the situation.

When to Seek Professional Help

Most disassembly tasks can be done by yourself, but there are certain situations where professional help might be necessary. For example, if your chair has internal parts that need replacement or if you are unable to remove a part despite trying different methods, it’s a good idea to consult a professional. Some office furniture stores or chair manufacturers offer repair services, and they can help you fix issues or disassemble the chair without damaging it.

If you’re considering buying replacement parts, be sure to check the manufacturer’s website for availability. You can find more information about the Interion Rolly Chair at the official website.

Conclusion: Successfully Disassembling Your Interion Rolly Chair

Disassembling your Interion Rolly Chair can be a simple and rewarding task when you follow the right steps. Whether you’re moving, cleaning, or replacing parts, taking the time to properly disassemble your chair ensures that you can do so safely and effectively. Remember to use the right tools, keep track of your parts, and be patient throughout the process. By following this guide, you can confidently take apart your chair and put it back together when necessary.

Need more furniture tips? Check out our other guides on how to assemble and maintain office furniture here.

This article is in the category Guides & Tutorials and created by TheFixitLab Team