Unveiling the Intricacies of Disassembling a Redding Powder Measure

Unveiling the Intricacies of Disassembling a Redding Powder Measure

The Redding powder measure is a staple for reloaders seeking precise and consistent powder charges. Whether you’re new to reloading or a seasoned enthusiast, understanding the disassembly process is essential for maintaining performance and prolonging the life of your equipment. This guide walks you through every detail, ensuring you can handle your powder measure with confidence.

Why Disassemble Your Redding Powder Measure?

Over time, powder residue and debris can accumulate, affecting the accuracy and consistency of your powder measure. Regular disassembly and cleaning help to:

• Maintain precise measurements
• Prevent mechanical issues
• Extend the lifespan of your equipment
• Ensure safe reloading practices

Now, let’s dive into the step-by-step guide for disassembling a Redding powder measure.

Tools You’ll Need

Before starting, gather the necessary tools and materials:

• A clean work surface
• Screwdrivers (flathead or Phillips, depending on your model)
• Lint-free cloth or cleaning wipes
• Soft brush for powder residue
• Light lubricant (optional)

Step-by-Step Guide to Disassembling Your Redding Powder Measure

Step 1: Prepare Your Work Area

Ensure your workspace is well-lit and free from distractions. Place all tools and cleaning materials within easy reach. *Safety tip: Always ensure the powder measure is empty before beginning disassembly.*

Step 2: Remove the Hopper

The hopper is the top part of the Redding powder measure where powder is stored. Gently unscrew or detach it, depending on your model. Use a soft cloth to wipe away any powder residue inside the hopper.

Step 3: Detach the Metering Assembly

The metering assembly controls the volume of powder dispensed. To remove it:

• Loosen any screws or knobs securing the assembly.
• Carefully slide it out of the main body.
• Inspect for any signs of wear or residue buildup.

Step 4: Disassemble the Metering Assembly

The metering assembly consists of smaller components that may require cleaning. Refer to your user manual for specific details, as some models have different configurations.

• Remove the drum or rotor carefully.
• Inspect the interior chambers for clogs or buildup.
• Wipe all parts with a lint-free cloth or use a soft brush to remove residue.

Step 5: Clean the Main Body

With the hopper and metering assembly removed, inspect the main body of the powder measure. Use a soft brush to clean out any residue, paying special attention to the powder drop tube.

Step 6: Reassemble the Powder Measure

Once all components are cleaned and inspected:

• Reattach the metering assembly, ensuring it fits snugly.
• Secure the hopper back into place.
• Test the powder measure by running a few dry charges to ensure proper functionality.

Troubleshooting Common Issues

Sticky or Inconsistent Rotations

If the drum or rotor feels sticky during operation, check for:

• Residue buildup inside the metering chamber
• Loose or over-tightened screws
• Use of the wrong lubricant (if applicable)

After cleaning, apply a light lubricant sparingly to moving parts.

Irregular Powder Charges

If your Redding powder measure dispenses inconsistent charges, the issue could stem from:

• Debris obstructing the drop tube
• An improperly seated metering assembly
• Uneven powder flow due to static buildup

Consider using an anti-static treatment or wiping the hopper with a dryer sheet to minimize static electricity.

Difficulty Reassembling Components

If reassembly proves challenging:

• Refer to the user manual for proper alignment of parts.
• Ensure no parts are warped or damaged.
• Double-check screw tension to avoid overtightening.

Maintaining Your Redding Powder Measure

To keep your Redding powder measure in peak condition:

• Clean it after every reloading session.
• Store it in a dry, dust-free environment.
• Periodically inspect components for wear and replace as needed.

For more tips on reloading equipment maintenance, check out our comprehensive reloading guide.

Conclusion

Disassembling and maintaining your Redding powder measure is a straightforward process that ensures accurate powder dispensing and extends the life of your equipment. By following the steps outlined in this guide, you’ll be equipped to tackle any maintenance tasks with ease. Proper care not only enhances performance but also ensures safer reloading practices.

If you’re looking to upgrade or replace parts of your Redding powder measure, visit Redding Reloading’s official website for high-quality components and accessories.

This article is in the category Guides & Tutorials and created by TheFixitLab Team